Login

[ESS/ICS-DMCS] DMCS in-kind project quarterly meeting - Q2_2019, Rzeszow

→ Europe/Warsaw
Sala Patio

Sala Patio

Sala Patio, Grand Hotel Boutique, ul. Kosciuszki 9, 35-030 Rzeszow
BLM Panel
    • 09:00 → 09:20
      Introduction and welcome word 20m
    • 09:20 → 09:40
      DMCS-LUT status report 20m
      Speakers: Wojciech Cichalewski (Technical Univrsity of Lodz), Dr Wojciech Jalmuzna (DMCS)
      DMCS-LUT milestones_status.pdf
    • 09:40 → 10:00
      ICS status report 20m
      Speakers: Faye Chicken (European Spallation Source ERIC), Henrik Carling (European Spallation Source ERIC), Kaj Rosengren (European Spallation Source ERIC)
      ICS Status Update 2019-06-25.pdf
    • 10:00 → 10:30
      EPICS for IPMI - DMCS status and WU realization plans 30m
      Speakers: Piotr Perek, Aleksander Mielczarek
      ESS_ICS_Rzeszow_2019_06_26.pdf

      Discussion:

      PP: Can we use the OpenHPI (or a custom) daemon, one per CPU?
      FDSA: We should give it a try. Prepare the software and we will evaluate it.

      PP: Is there an infrastructure allocated to run the IPMI IOCs?
      FDSA: The MicroTCA machines will run disk-less. The image servers could be used for crate monitoring.

      PP: What distribution of GNU/Linux is used on those machines? We currently use CentOS for development.
      FDSA: The MicroTCA CPUs will run Yocto. For the server side development continue using CentOS.

      PP: Who to contact about details on the GNU/Linux distributions used in ESS?
      FDSA: Olivier or Han
      IDK: However, currently they are on leave/vacation/something

    • 10:30 → 10:50
      Cofee break 20m
    • 10:50 → 11:20
      RTM carrier HW/FW status 30m
      Speakers: Aleksander Mielczarek, Rafal Kielbik (Politechnika Lodzka DMCS)
      rtm_carrier_status.pdf

      New piezo driver RTM (HPD200):
       - 1 circuit less (Programmable Gain Amplifier - PGA) - better results (gain was not the same between the boards)
       - channel switching and protection: UART to be replaced by 12 control lines (Diagnostic MCU <=> FPGA) + IPMI
      BSP:
       - MicroBlaze is provided by NCBJ but not used.
       - DDR3 controler provided by NCBJ is for different memory than soldered (NCBJ promised the new BSP till the end of June), at the moment BRAM is used.
      Anders Johanson is main contact regarding Piezo Driver. TUL is a part of ICS now (in that topic).
       

    • 11:20 → 11:50
      nBLM and icBLM systems status and test plans, tunnel installation plans, deployment schedule 30m
      Speaker: Irena Dolenc Kittelmann (European Spallation Source ERIC)
    • 12:20 → 13:20
      Lunch break 1h
    • 13:50 → 14:20
      icBLM software architecture and integration with E3 30m
      Speakers: Dr Wojciech Jalmuzna (DMCS), Fabio dos Santos Alves (OTIF AB (IBAN))

      WJ Talk:

      e3-icblmapp was created and is too big due to tosca as submodule.
      It was requested for Han a merge request.
      Asyn instead NDS3.
      A lot of threads runnings in parallel.
      Standard way to write data on PVs.
      512 samples per time.
      It's needed a final algorithm for icBLM.
      How to use the calibration file? Read, apply and Publish as PV's?
      How the control panels for icBLM should look like?

       

      ICBLM Specification can be found at https://jira.esss.lu.se/browse/PBIICBLM-15

      Irena presentation of how the IOC should look like:

      Table 6 - ID's were discussed and how it should appear on IOC. Historic acquisition should be shown.

      Raw data and Calibrated data. It should be selected.

      Range selected on real time?

      Same decimation on everything.Multi axes or check box for previous data.

    • 14:50 → 15:10
      Cofee break 20m
    • 15:10 → 15:30
      Near future plans, Technical Annex schedule update, ESS global schedule update 20m
    • 15:30 → 16:00
      Summary and Conclusions 30m
Powered by Indico v3.2.8